• Dee Why Grand

    Sheet Piles and Anchors

    Client:  Southern Cross Constructions
    Address:  Pittwater Rd. Dee Why

    Description

    CF Group installed 30m length AZ36 sheet piles (done for the first time in the southern hemisphere) for a 6-level basement excavation. Four rows of temporary ground anchors installed to provide lateral support to the shoring

     

    Equipment Used

    LRB255 Piling Rig to install 30m sheet piles, PVE40VM Vibro Hammer, Tamrock Anchoring Rig to install 76mm hollow bar anchors

     

  • Mascot Central

    Complete Basement Solutions

    Client:    Meriton
    Address: 19 -33 Kent Rd, Mascot

    Description

    CF Group designed and constructed the complete basement solutions for Meriton’s 2 towers at 19-33 Kent Rd, Mascot. The towers’ common 2-level basement excavation had 12,100m2  of CSM shoring wall constructed and four rows of temporary ground anchors were installed to provide lateral support of up to 610kN to the shoring wall. The CSM wall was 15m in depth throughout the common basement and served as a groundwater cut off system for a safe construction platform.  (more…)

  • Avion Apartments

    Complete Basement Solutions

    Client:   Deicorp Constructions
    Address:   Innesdale Rd. Arncliffe

    Description

    CF Group installed a 600mm thick Soil Mix shoring wall, adjacent to a major road,   for a 3 level basement. The shoring was supported by one level of anchors and a lower layer of propping.

    Equipment used

    LRB255 Piling Rig with TEC CSM Cutter Attachment, BA250 attachment for CFA Foundations, Tamrock Anchoring Rig to install hollow bar anchors

  • Residential Development, Manly

    Cutter Soil Mix

    Client:    Hutchinson Builders
    Address:   Victoria Pd. Manly

    Description

    Soil Mix Shoring Wall

    Equipment used

    LRB255 Piling Rig with TEC CSM attachment

  • Ferrari/Maserati Showroom

    Secant Pile Walls

    Client:     Built
    Address:    Bourke. St. Alexandria

    Description

    CF Group installed a highly innovative shoring system combining both Soil Mixing techniques and sheet piling to install an impermeable shoring system to cater for the challenging ground conditions

    Equipment used

    RRTG19T Piling Rig

  • Daracon Site

    Sheet Piles

    Client:     Piling Contractors Pty Ltd
    Address:    Newcastle

    Description

    High frequency vibratory hammer used to minimise vibration to adjacent properties and eliminate any pre-drilling requirment.

    Equipment used

    CF Group LRB255 Piling Rig mounted with PVE40VM Vibro Hammer on a wet hire arrangement to install AZ36-700 sheet piles.

  • Bondi Waters Aged Care Facility

    Secant Pile Walls with Anchors

    Client:   Absolute Contracting
    Address:   Obrien St. Bondi

    Description

    CF group installed an impermeable Secant Pile shoring wall with piles socketed into medium strength rock. Two rows of Hollow Bar anchors were installed to provide lateral support to the wall.

    Equipment Used

    RTG19T Piling Rig with Double Rotary casing to install a water tight secant pile wall and foundation piles and Tamrock anchoring rig

  • Cazzie Club

    CSM with Anchors

    Client:    Link Constructions
    Address:    Anzac Pd. Kingsford

    Description

    CF Group installed an impermeable Soil Mix shoring wall for a 2 level basement with one row of hollow bar anchors.

    Equipment Used

    TEC attachment on the Leibherr LRB255 Piling Rig

  • NCIG

    Driven Piles

    Client:     Corrosion Control Engineering
    Address:     Newcastle

    Description

    CF Group installed 400mm diameter hollow tubes up to depths of 15m to perform the role of anode castings.

    Equipment Used

    32VMR Ring Vibro attachment mounted on a Liebherr LRB 255.

  • Fusion Apartments

    CFA Piles

    Client:      Meriton
    Address:  Loftus Road, Arncliffe

    Description

    CF group installed in excess of 350no. deep foundations piles of 600mm and 750mm diameters up to depths of 26m socketing into medium to high strength rock.

    Equipment Used

    Bauer RTG19T and Liebherr LRB255 Piling Rigs.

  • Divercity Apartments

    CSM Cut -Off barrier

    Client:   Becton
    Address:   Bourke St. Waterloo

    Description

    Cut-Off Cantilever Soil Mix Shoring Wall for a 1.5 level basement adjacent to an major road.

    Equipment Used

    TEC attachment mounted on a Leibherr LRB255 Piling Rig.

     

  • Multi-Storey Apartments

    Bored Piles (for retaining walls)

    Client: Steve Nolan Constructions
    Address:  Railway Pd. Burwood

    Description

    CF Group installed 600mm and 750mm diameter bored soldier piles adjacent to Burwood Railway Station, drilling up to depths of 19m with sockets exceeding 10m into Class II Shale.

    Equipment Used

    LRB255 Piling Rig

  • The Corsoleil

    Cutter Soil Mix

    Client:  Richard Crookes Constructions
    Address:  The Corso, Manly

    Description

    Soil Mix shoring wall installed for a 1.5 level basement. Final wall deflection at project completion did not exceed 7mm.

    Equipment Used

    LRB255 Piling rig with TEC attachment

     

  • La Boheme

    CSM Cut -Off barrier

    Client:   Toga Group
    Address: Hall St. Bondi

    Description

    CF Group installed an impermeable, Cut-Off Soil Mix shoring wall for a 3 level basement with two rows of anchors to provide lateral support to the basement walls.

    Equipment Used

    TEC attachment on the Leibherr LRB255 Piling Rig.

  • Airview Apartments

    Cutter Soil Mix

    Client:   Toplace
    Address:   Coward St. Mascot

    Description

    CF Group installed an impermeable Soil Mix shoring wall for a 3 level basement with two rows of hollow bar anchors for lateral support

    Equipment Used

    TEC attachment on the Leibherr LRB255 Piling Rig

  • UNSW Student Accommodation

    CFA Piles

    Client:    Richard Crookes Constructions
    Address:    High St. Kensington

    Description

    CF Group installed in excess of 250 piles with diameters of 600mm and 750mm socketing into Class 2 sandstone

    Equipment Used

    RTG19T and ABI Piling rigs using MB80 and MB50 Drill motors

  • East Village

    Cutter Soil Mix

    Client:  Dasco Australia
    Address:  Cooper Place, Zetland

    Description

    CF Group installed an impermeable Soil Mix shoring wall for a 3 level basement with two rows of hollow bar anchors.

    Equipment Used

    BCM10 cutter attachments on the Bauer RTG25S and BG30 Piling Rig